Home    Products and Service    Passive Products for High Power Jammer
IED jammers are composed of jamming sources, Power amplifiers, antenna and System controller. Beside these key component, there are passive RF component we cannot neglect their importance, such as high power diplexers, high coupler/detector, high power combiner.
Diplexers
  • This three port device combines two high power signal of different band with minimized combining loss.
  • It allows us sharing of antenna for multi-band signal and avoiding multi-carrier usage of amplifier. Therefore, it will bring many benefit in system such as reliability increase, efficiency increase, simple and light weight.
  • Lumped Element Design
  • Cavity Element Design
  • Ceramic Element Design

Datasheets
Part Number Band Width (B1) Band Width (B2) Insertion Loss (dB) Isolation (dB) VSWR Peak Power Handling Size (mm) Weight (g)
RDX100C 20-116MHz 142-500MHz <1.2dB 20 <2.0 260W 100x90x25 403
RDX400A 100-400MHz 440-900MHz <1.2dB 20 <2.0 260W 100x90x25 403
RDX05-18N22-36A 500-1800MHz 2200-3600MHz <0.8dB 13 <2.3 100W 95x50x17 112
RDX09N18-22A 800-1000MHz 1800-2200MHz <0.4dB 20 <2.0 100W 95x50x17 112
The product information in this data is for reference only.
This is subject to change without notice.
Contact our sales staff for further information before considering or ordering any of our products.
Please request the Engineering Specification and Drawing for the most current and accurate design information.
Coupler-detector, REDEC ( Return Loss Detector )
  • RFcore posses intellectual properties for high precision high directivity coupler design. Well behaving wideband couplers working in 20 MHz to 3 GHz has 20 dB or higher directivity which is enough for discriminating connection failures after-amplifier parts such as antenna, output connector or output cable. Couplers are supplied with built-in power level detector, by default. By option, buffered detector output, VSWR output, VSWR alarm output and adjustment of VSWR alarm we supply. Feel free to contact for more understanding of this versatile module. Working bandwidth are 10~100 MHz, 100~500 MHz, 500~3000 MHz, 3000~6000 MHz with 10W,100W, 300W operating power are available.

Datasheets
Part Number Frequency Range Insertion Loss(dB) Directivity Peak Power Handling Size (mm) Weight (g)
RCP00202A 20-200MHz <0.4 20dB 100W 86x90x27 362
RCP0105D 100-500MHz <0.4 20dB 300W 86x90x27 362
RCP0510A 500-1000MHz <0.4 20dB 100W 86x90x27 362
RCP0530A 500-3000MHz <0.7 20dB 100W 95x40x17 87
RCP3060A 3000-6000MHz <0.9 16dB 50W 60x42x17 54
The product information in this data is for reference only.
This is subject to change without notice.
Contact our sales staff for further information before considering or ordering any of our products.
Please request the Engineering Specification and Drawing for the most current and accurate design information.
If you need more information, please email us at sales@rfcore.com